Three Calls to a Propylene Glycol Manufacturer/Distributer in Gujarat
These calls are imaginary. They are illustrations of the questions buyers ask, not real customers.
Call one: the pharma QA officer in Ahmedabad
Caller: I need propylene glycol for an oral liquid. My auditor will go through the paperwork. What can you give me?
Us: First, which standard does your auditor work to: IP, USP, BP or Ph. Eur.? That decides the grade. We list a USP grade and a technical grade. If you need another pharmacopoeia, tell us which one, and we’ll say honestly whether we can meet it and what documents we can provide.
Caller: And the technical grade?
Us: That’s for non-edible work, and it isn’t tested to the same limits. Please don’t put it into anything that goes in or on a person. If your product is a medicine, use the pharmacopoeia grade, and keep the two grades in separate, clearly labelled places in your store.
Caller: What will come with the drum?
Us: The MSDS with every order, and we can share a COA for the lot if you ask. Ask for it before your first bulk order, compare each figure with your own limits, and tell us if your QA team needs anything else, such as a specification sheet. We’ll tell you straight away what we can provide.
Call two: the cosmetics founder in Surat
Caller: I make a small range of creams and lotions. I only know that propylene glycol keeps them moist. How much do I need?
Us: It’s a humectant and a solvent, so it holds moisture and helps other ingredients dissolve. How much you use depends entirely on your formula, so I won’t give you a number over the phone. Most small makers buy a drum’s worth far too early, so start by telling me your monthly volume and your batch sizes.
Caller: Is it safe on skin?
Us: It’s widely used in personal care at controlled levels, and some people are sensitive to it, so test your finished product and follow the rules for your market. Check the requirements with CDSCO for cosmetics. And if you are selling in another country, check that country’s rules too.
Caller: A drum seems like a lot.
Us: It is. A 215 kg drum holds about 207 litres, and a small cosmetic brand can take a long time to use that. Propylene glycol soaks up moisture from the air, so a half-used drum can drift away from its specification. If your volume is small, tell us, and we’ll say honestly whether a drum makes sense for you.
Call three: the resin and coolant buyer in Vadodara
Caller: I’m comparing glycols for a coolant and for unsaturated polyester resin. I’ve been quoted mono ethylene glycol cheaper. Why would I pay more for propylene glycol?
Us: For the resin, propylene glycol is a raw material in its own right, and it gives the resin different properties from ethylene glycol, so it depends on what you are making. For the coolant, the question is who might touch it. Ethylene glycol is toxic if swallowed and tastes sweet. Propylene glycol is much less toxic, which is why people use it where food, drink or people are close by, such as in dairies, breweries and food plants. If nobody will ever come into contact with it, ethylene glycol is usually cheaper.
Caller: So you’d sell me the cheaper one?
Us: If it suits your job, yes. We supply both, so we have no reason to push the wrong one. See our mono ethylene glycol (MEG) manufacturer/distributer in Gujarat page for the other side of that comparison.
One Paragraph on Grades
The question running through all three calls is grade. A pharmacopoeia grade such as USP is tested against a published standard for purity and impurities, and it comes with the documents an auditor wants. A technical grade is for industrial uses where those limits don’t matter, and it costs less. The two must never be mixed, in the store or in the process. Our listing shows USP and technical grades, and for IP, BP, food or any other grade, tell us the requirement and we confirm whether we can meet it. We don’t claim a grade we can’t document. The full product details are on our propylene glycol product page, and the chemistry is on PubChem and Wikipedia.
The Drum Maths Everyone Asks For
Propylene glycol has a density of about 1.036 kilograms per litre, a little heavier than water. A 215 kg drum therefore holds about 207 litres. To compare quotes, multiply a per-kilo price by about 1.036 to get a per-litre price, or divide a per-litre price by 1.036 to get a per-kilo price. The difference is small for this product, so the bigger traps are elsewhere: whether the price is for the USP grade or the technical grade, whether delivery is included, and whether the quote covers a full drum or a part-drum. Get all three in writing. For monthly planning, one tonne a month is a little under five drums, and five tonnes is about 23. We confirm the packing, price and dispatch plan with your quote.
Propylene Glycol, MEG and Glycerine in Plain Words
People often ask which of the three they should buy. Propylene glycol is a thin to slightly thick liquid, much less toxic than ethylene glycol, and it is the usual choice for medicines, food contact, cosmetics and safer coolants. Mono ethylene glycol is the cheaper workhorse for polyester, PET and ordinary antifreeze, but it is toxic if swallowed. Glycerine is thicker and sweeter, and it is mostly used for moisturising, soaps and some foods. Tell us what you make and we’ll say honestly which one fits, even if it is the cheaper one.
Where Propylene Glycol Is Used, and Who Might Be Calling From Gujarat
Propylene glycol goes into oral liquids, syrups, drops and gels, into creams and lotions, into flavour and food carriers where permitted, into unsaturated polyester resins, into heat-transfer fluids for food plants, and into paints, inks and detergents as a solvent. Gujarat has a big pharma and chemical sector around Ahmedabad, Vadodara, Ankleshwar and Vapi, cosmetic and personal-care makers, resin and paint units and food processors, among other industries. That describes where the chemical is used in general. It isn’t a list of our customers.
Buyers in Ahmedabad, Surat, Vadodara, Rajkot, Vapi, Ankleshwar, Bharuch, Dahej and other Gujarat towns can place orders. If you buy related materials, see our page for cosmetic and fragrance work, our page for cleaning and pharma solvents, and our full product range. For everything else, see our chemicals in Gujarat page.
Keeping Propylene Glycol Fit for Use
Propylene glycol is gentle compared with most industrial chemicals, but a few habits matter, especially in Gujarat’s humid monsoon.
It absorbs water from the air, so keep drums tightly closed and reseal straight after use. Store them in a cool, dry, covered place, off the floor and away from strong oxidisers and heat. It is combustible but has a high flash point, so it doesn’t ignite easily, though you should still keep flames away. Clean spills quickly, because glycol makes floors very slippery, and soak them up with an inert absorbent. Never top up a pharma-grade drum from a technical-grade one, or the other way round. Dispose of waste as the MSDS says, and don’t wash large amounts into drains, because glycols use up oxygen in water. For waste and environmental questions, contact the Gujarat Pollution Control Board. Keep the MSDS where your team works.
Manufacturer or Distributer: What to Ask
A manufacturer makes the product, and a distributor supplies it from others. For a buyer, the label matters less than the answers. Does the supplier say which grade the drum holds, and can they show the paperwork for that grade? Do the MSDS and batch details arrive with the shipment, and is a COA available for your lot? Will they say honestly if another grade or glycol suits you better? If you want to know how we supply a specific order, ask us when you enquire. You can reach us through our Contact page.
Rules to Check, and How to Order
If your product is a medicine, check your pharmacopoeia and your licence conditions with CDSCO and your state drug authority, and see the Indian Pharmacopoeia Commission for IP standards. If it is a food, check FSSAI. We can’t give legal advice, and what applies depends on your product.
To order, send us the grade and pharmacopoeia you need, what you will use it for, your monthly quantity, the limits that matter to you (purity, water, impurities), the documents your QA team needs, your delivery town in Gujarat and your business details, through our Contact page. We reply with a quote and confirm the dispatch plan and delivery time with it. MSDS comes with every shipment, and a COA is available on request.
Propylene Glycol Manufacturer/Distributer in Gujarat: Frequently Asked Questions
Who is a reliable propylene glycol manufacturer/distributer in Gujarat?
Look for a supplier who is clear about grade, sends proper documents and gives honest advice. Shivam Industries supplies USP and technical grade propylene glycol in 215 kg drums to buyers across Gujarat, with MSDS with every order.
What is propylene glycol used for?
As a solvent, humectant and carrier in medicines, cosmetics and food, as a raw material for unsaturated polyester resins, in heat-transfer fluids and coolants and in paints, inks and detergents.
What is the CAS number of propylene glycol?
57-55-6.
What is the difference between USP and technical grade propylene glycol?
USP is a pharmacopoeia grade tested against a published standard for purity and impurities. Technical grade is for non-edible uses and isn’t tested to the same limits, so it must not go into anything people eat or apply.
Can I use technical grade in a cream or a syrup?
No. Anything that goes in or on a person needs a suitable pharmacopoeia or food grade with matching documents.
Do you supply IP, BP or food grade?
Tell us which standard your auditor follows. We confirm whether we can meet it and what documents we can provide, and we don’t claim a grade we can’t document.
How many litres are in a 215 kg drum?
About 207 litres, because propylene glycol has a density of about 1.036 kg per litre.
Is propylene glycol safe?
Pharma and food grades are widely accepted for approved uses at controlled levels, and it is much less toxic than ethylene glycol. Some people are sensitive to it, so test your finished product. Technical grade isn’t meant for anything people eat or apply.
Is propylene glycol the same as MEG?
No. They are different chemicals. Propylene glycol has a much lower toxicity, while mono ethylene glycol is toxic if swallowed.
How should I store it?
In tightly closed containers, in a cool, dry, covered place, off the floor and away from strong oxidisers. It absorbs moisture, so reseal straight after use and never mix grades.
How long does delivery to Gujarat take?
It depends on your quantity, town and the season. We confirm it with your quote.
What documents come with an order, and what is the minimum order?
MSDS with every shipment, and a COA on request. The minimum order and sample options depend on your requirement, and we confirm them with your quote.
Looking for a trusted propylene glycol manufacturer/distributer in Gujarat? Tell us your grade, use, monthly quantity and delivery town, and we will reply with details and a quote.